Illuminated Incubator Shaker T17,T18,T19
Product Categories: Illuminated Incubator Shaker
This series of products is widely used in cell culture, antibody drug research and development, and the cultivation of microorganisms such as bacteria and molds. It is widely used in various pharmaceutical enterprises,environmental protection, medical and health care, and scientific research in universities.
Tel:+86-512-58666681
Can be stacked to 3 layers, saving indoor space.
Adopting a network topology based intelligent PID.
Magnetic levitation drive, direct drive system, no belt, precise speed.
Hig hquality CFC compressor. Frequency conversion compressor.
Timing to start or stop or UV timing function.
More 50% energy-saving than traditional unit.
Three-level users management, complies with 21 CFR-part11.
Meets GMP requirements.
The chamber is made of SUS304 stainless steel for corrosion prevention.
The chamber is waterproof, rounded design for easy cleaning.
Equiped with two lights and ultraviolet lights on two sides.
Data export by the USB port.
Call recovery function after the power failure recovery.
Continuously record data for 5 years (stored per minute).
The screen can display temperature, speed and other curve functions.
Overtemperature alarm, overspeed alarm, etc.
10 inch touch screen display, all parameters display are clear at a glance.
Illuminated Incubator Shaker Function: magnetic drive, heat & cooling,illumination
Illuminated CO2 Incubator Shaker Function: magnetic drive, heat & cooling,illumination,CO2
Illuminated Tri-gas Incubator Shaker Function: magnetic drive, heat & cooling,illumination,CO2,O2(1-90%)
Name | Illuminated Incubator Shaker | Illuminated CO2 Incubator Shaker | Illuminated Tri-gas Incubator Shaker |
Layers stacked | 1 unit,2 units,3 units | ||
Speed range | 0,20~400rpm(Throw Φ26mm) 0,20~300rpm(Throw Φ50mm) | ||
Speed setting | 1rpm | ||
Speed fluctuation | ±0.5rpm | ||
Max. load | 25kg | ||
Shaking diameter | Φ26mm(Φ50mm) | ||
Driving way | Magnetic direct driver (no belt) | ||
Temp. range | 18 ℃ below room temp. (minimum 4℃) ~ 60℃ | ||
Temp. setting | 0.1℃ | ||
Temp. fluctuation | ±0.1℃ | ||
Temp. uniformity(@ 37°) | ≤±0.5℃ | ||
Temp. recovery | ≤min (@37℃) | ||
Humidity range | 20%~95%rH(Optional) | ||
Humidity setting | 0.1% rH(Optional) | ||
Humidity fluctuation | ±1.5% rH(Optional) | ||
Humidity recovery | <10min(@95%37℃)(Optional)) | ||
Humidity sensor | Capacitive(Optional) | ||
C02 range | / | 0~20% | 0~20% |
C02 setting | / | 0.10% | 0.10% |
C02 fluctuation | / | ±0.4@5% | ±0.4@5% |
C02 recovery | / | ≤min (@5%37℃) | ≤min (@5%37℃) |
C02 sensor | / | Infrared | Infrared( |
02 range | / | / | 1~90% |
02 setting | / | / | 0.10% |
02 fluctuation | / | / | ±0.4(@5%37℃) |
O2 recovery | / | / | ≤min (@5%37℃) |
Sterilization | UV Light(90℃ moist heat sterilization optional) | ||
Illumination | LED light | ||
Display | 10 inch touch screen | ||
Program segments | 20 segments | ||
Door open | T1,T2,T3 open down(Top layer open up),T5,T6 open right | ||
Curve display | Temp. curve, speed curve | ||
Data storage volume | More than 5 years | ||
Data storage interval | Adjustable(minimum 1 min.) | ||
Data storage contents | Running time, temp., speed, status for record | ||
Auto-defrost | Yes | ||
Rail tray | Yes | ||
Noise level | ≤5dB (cooling) | ||
Workable Hight | 310mm(T1 series)/345mm(T3,T5 series)/465mm(T2,T6 series) | ||
Max. power | 1200w | ||
Chamber waterproof | Yes | ||
Light intensity | 30000 Lux. Stepless intelligent control | ||
Lighting setting | 10Lux | ||
Chamber volume | 400L(T1 series)/500L(T2 series)/300L(T3 series)/200L(T5 series)/250L(T6 series) | ||
Tray dimmensions | 1000×520mm(T1,T2 series)/850×470(T3 series)/475×465(T5,T6 series) | ||
Power supply | AC220V ±10%, 50/60Hz |
Model | Name | Remarks |
T.A01 | T1 White light illumination assembly | for T1,T2 series |
T.A60 | T3 White light illumination assembly | for T3,T4 series |
T.A61 | T5 White light illumination assembly | for T5,T6 series |
T.A02 | WIFI controller | |
T.A03 | 25mL Flask clamp | |
T.A04 | 50mL Flask clamp | |
T.A05 | 100mL Flask clamp | |
T.A06 | 150mL Flask clamp | |
T.A07 | 200mL Flask clamp | |
T.A08 | 250mL Flask clamp | |
T.A09 | 500mL Flask clamp | |
T.A10 | 1000mL Flask clamp | |
T.A11 | 2000mL Flask clamp | |
T.A12 | 3000mL Flask clamp | |
T.A13 | 5000mL Flask clamp | |
T.A14 | 500mL Infusion bottle clamp | |
T.A15 | 1000mL Infusion bottle clamp | |
T.A16 | 500ml/1000ml Separatory funnel clamp | |
T.A17 | Deep hole plate clamp | |
T.A18 | 96 hole SBS microplate/deephole plate clamp | |
T.A23 | Tube rack 40×5ml/Φ14 | 255×88×87mm,240×60mm(install ) |
T.A24 | Tube rack 40×10ml/Φ16 | 259×96×87mm,240×60mm(install ) |
T.A25 | Tube rack 40×15ml/Φ19 | 289×103×87mm,270×60mm(install ) |
T.A26 | Tube rack 40×20ml/Φ23 | 349×124×87mm,330×90mm(install ) |
T.A27 | Tube rack 40×50ml/Φ30 | 419×161×87mm,390×90mm(install ) |
T.A28 | Adjustable tube rack 40×5ml/Φ14 | 263×106×105mm |
T.A29 | Adjustable tube rack 40×10ml/Φ16 | 267×106×105mm |
T.A30 | Adjustable tube rack 40×15ml/Φ19 | 297×106×110mm |
T.A31 | Adjustable tube rack 40×20ml/Φ23 | 337×124×120mm |
T.A32 | Adjustable tube rack 40×50ml/Φ30 | 405×161×130mm |
T.A33 | T1 Petri dish layer partition | for T1,T2 series |
T.A62 | T3 Petri dish layer partition | for T3,T4 series |
T.A63 | T5 Petri dish layer partition | for T5,T6 series |
T.A34 | T1 Multifunctional spring holder | for T1,T2 series |
T.A64 | T3 Multifunctional spring holder | for T3,T4 series |
T.A65 | T5 Multifunctional spring holder | for T5,T6 series |
T.A35 | T1 Viscous tray | for T1,T2 series |
T.A66 | T3 Viscous tray | for T3,T4 series |
T.A67 | T5 Viscous tray | for T5,T6 series |
T.A36 | Sticky stuff 280×280 | T1、T2 fit to 6.5 pieces , T3、T4 fit to 5 pieces , T5、T6 fit to 3 pieces |
T.A37 | Light&UV light assembly | |
T.A38 | Light assembly | |
T.A39 | UV light assembly | |
T.A40 | Humidification bucket | |
T.A43 | T1 humidification add water module | for T1,T2,T3,T4 series |
T.A68 | T5 humidification add water module | for T5,T6 series |
T.A45 | T1 rack 280 | for T1,T2 series |
T.A69 | T3 rack 280 | for T3,T4 series |
T.A70 | T5 rack 280 | for T5,T6 series |
T.A47 | T1 block light module | for T1,T2 series |
T.A71 | T3 block light module | for T3,T4 series |
T.A72 | T5 block light module | for T5,T6 series |
T.A48 | Embedded printer | |
T.A49 | 8-channel SMS/phone alarm | |
T.A50 | CO2、O2、N2 pressure reducer | |
T.A53 | Intake filter 0.25um | |
T.A54 | Electric door lock | |
T.A55 | T1 double layer tray 180 | for T1,T2 series |
T.A73 | T3 double layer tray 180 | for T3,T4 series |
T.A74 | T5 double layer tray 180 | for T5,T6 series |
T.A56 | T1 cylindrical tray | for T1,T2 series |
T.A75 | T3 cylindrical tray | for T3,T4 series |
T.A76 | T5 cylindrical tray | for T5,T6 series |
T.A58 | 90℃ damp heat sterilization module | |
T.A59 | Dehumidification module | |
T.A60 | Humidification module | |
T.A61 | Sticky stuff 140X140 | T1 orT2 fit to 24 pieces,T3 orT4 fit to 18 pieces,T5 or T6 fit to 9 pieces |
T.A62 | T1 Connection sink | for T1,T2 series |
T.A77 | T3 Connection sink | for T3,T4 series |
T.A78 | T5 Connection sink | for T5,T6 series |
![]() | ![]() | ![]() |
Flask clamp | Deep hole plate clamp | Tube rack |
T.A03-T.A13 | T.A176 | T.A23-T.A32 |
![]() | ![]() | ![]() |
Multifunctional spring holder | Rack 280 | Double layer tray 180 |
T.A34,T.A64,T.A65 | T.A45,T.A69,T.A70 | T.A55,T.A73,T.A74 |