Mould Incubator
Product Categories: Mould Incubator
This series of products are widely used in the culture, plant culture and sample preservation of molds and other microorganisms requiring humidity. They are widely used in pharmaceutical enterprises, environmental protection, medical and health care, scientific research in Colleges and universities, etc.
Tel:+86-512-58666681
Simple operation, fixed value operation and timing operation.
The network topology intelligent PID temperature control method is adopted, and the parameters can be adjusted adaptively.
Power recovery function. After power failure, the power will recover automatically.
Mirror stainless steel plate liner, semicircular arc four corner design, easy to clean.
Fluorine free environmental protection compressor
Mechanical forced convection, good temperature uniformity.
The spacing between partitions in the box is adjustable
Fillet design for easy cleaning.
Using PT100 temperature sensor, more accuracy.
It integrates heating, refrigeration, humidity control and sterilization functions
Up to 30 programs.
Ultraviolet sterilization function, the naked eye will not look directly at the lamp.
With sterilization function, it can be sterilized at 70 ℃.
There is a glass inner door, which is well insulated, and the observation with the outer door open will not affect the experiment.
The steam after 140 ℃ high temperature sterilization is used for humidification, and the steam particles are small.
The base is equipped with wheels for easy movement.
Temperature self diagnosis function.
Over temperature alarm, over humidity alarm, water shortage alarm.
Key lock
Name | Mould Incubator | ||
Model | IN70RM | IN150RM | IN250RM |
Volume | 70L | 150L | 250L |
Temperature range | 15 ℃ (minimum 0 ℃, minimum 10 ℃ for humidification) below ambient temperature - 70 ℃ | ||
Temperature resolution | 0.1℃ | ||
Temperature fluctuation | ± 0.3 ℃ (pure heating), ± 0.5 ℃ (refrigeration) | ||
Temperature uniformity | ± 0.8 ℃ (at 25 ℃) | ||
Display | LCD | ||
Humidity range | 35%~95%RH | ||
Humidity fluctuation | ±5%RH | ||
Air convection mode | Mechanical convection | ||
Timer | 0-99.9h | ||
Multistage program control | Paragraph 30 | ||
Test hole | Ø43mm | ||
Working cavity material | Mirror stainless steel | ||
Defrosting | Intelligent timely defrosting | ||
Alarms | Overtemperature audible and visual alarm, overtemperature alarm, water shortage alarm | ||
Power recovery | yes | ||
Available for division plates | 5 | 9 | 12 |
Partition spacing | 35mm | ||
Internal dimensions (W * D * H) | 420×350×500mm | 500×500×600mm | 600×500×840mm |
External dimensions (W * D * H) | 572×585×1075mm | 645×630×1310mm | 640×730×1510mm |
Net weight | 70Kg | 85Kg | 101Kg |
Match for division plates | 2 | ||
Max. power | 1.8kw | 2.0kw | 2.2kw |
Power Supply | AC220V ±10%, 50~60Hz | ||
Ambient temperature | 5 ~ 40℃ |
Model | Name | Remarks |
IN.A03 | Division plate | for IN70R series |
IN.A04 | Division plate | for IN150R series |
OV.A06 | Division plate | for OV230W 、IN230H、IN250R series |
OV.A08 | Embedded printer | for LCD models |
OV.A09 | Program controller | for LCD models |
OV.A10 | Wireless short message alarm | for LCD models |
OV.A11 | U disk data storage assembly | for LCD models |
OV.A12 | RS485 module and remote controller | for LCD models |