Biochemical Incubator
Product Categories: Biochemical Incubator
This series of products are widely used in the cultivation of bacteria, molds and other microorganisms, plant breeding and cultivation, sample preservation, and are widely used in pharmaceutical enterprises, environmental protection, medical and health care, scientific research in Colleges and universities.
Tel:+86-512-58666681
The network topology intelligent PID temperature control method is adopted, and the parameters can be adjusted adaptively.
Power recovery function. After power failure, the power will recover automatically.
Mechanical forced convection, good temperature uniformity ± 0.8 ℃ (at 25 ℃).
Double door design, inner glass door, outer carbon steel door, good heat preservation, open the door and observe from a large angle, which does not affect the experiment.
Fillet design for easy cleaning.
There is a lamp and the lamp tube cannot be seen directly. And there is a socket inside and outside the box.
Using PT100 temperature sensor, more accuracy.
Up to 30 programs( (with L model).
Temperature self diagnosis function.
Over temperature alarm.
Name | Biochemical Incubator | |||||
Model | IN70R | IN150R | IN250R | IN70RL | IN150RL | IN250RL |
Volume | 70L | 150L | 250L | 70L | 150L | 250L |
Temperature range | 15 ℃ (minimum 0 ℃) - 65 ℃ below ambient temperature | |||||
Temperature resolution | 0.1℃ | |||||
Temperature fluctuation | ± 0.3 ℃ (pure heating), ± 0.5 ℃ (refrigeration) | |||||
Temperature uniformity | ± 0.8 ℃ (At 25 ℃) | |||||
Temperature display | LCD | |||||
Air convection mode | Mechanical convection | |||||
Timer | 0-99.9h | |||||
Program control | nothing | 30 | ||||
Test hole | Ø43mm | |||||
Working cavity material | Mirror stainless steel | |||||
Defrosting | Intelligent timely defrosting | |||||
Alarms | Overtemperature audible and visual alarm | |||||
Temperature sensor | Pt100 | |||||
Power recovery | yes | |||||
Available for division plates | 5 | 9 | 12 | 5 | 9 | 12 |
Partition spacing | 35mm | |||||
Division plate load | 15Kg/piece | |||||
Internal dimensions (W * D * H) | 420 * 350 * 500mm | 500 * 500 * 600mm | 600 * 500 * 840mm | 420 * 350 * 500mm | 500 * 500 * 600mm | 600 * 500 * 840mm |
External dimensions (W * D * H) | 570 * 580 * 1060mm | 650 * 640* 1315mm | 655 * 740 * 1510mm | 570 * 580 * 1060mm | 650 * 640* 1315mm | 655 * 740 * 1510mm |
Net weight | 70Kg | 85Kg | 101Kg | 70Kg | 85Kg | 101Kg |
Match for division plates | 2 | |||||
Max. power | 0.8kw | 1.0kw | 1.2kw | 0.8kw | 1.0kw | 1.2kw |
Power Supply | AC220V ±10%, 50~60Hz | |||||
Ambient temperature | 5 ~ 40℃ |
Model | Name | Remarks |
IN.A07 | Division plate | for IN70R、IN70RL、IN70RM series |
IN.A08 | Division plate | for IN150R、IN150RL、IN150RM series |
IN.A09 | Division plate | for IN250R、IN250RL、IN250RM series |
OV.A08 | Embedded printer | for LCD models |
OV.A09 | Program controller | for LCD models |
OV.A10 | Wireless short message alarm | for LCD models |
OV.A11 | U disk data storage assembly | for LCD models |
OV.A12 | RS485 module and remote controller | for LCD models |