中文
English
Fume hood
Product Categories： Fume hood
The fume hood integrates water, electricity, gas and ventilation, and is mainly used for pipe exhaust. In the chemical laboratory, various harmful gases, odors, hot gases, moisture, as well as flammable, explosive and corrosive substances are produced. In order to protect the safety of users and prevent the diffusion of pollutants in the experiment to the laboratory, fume hoods need to be selected.
Tel：+86-512-58666681
It adopts high-quality cold-rolled steel plate, with plastic sprayed surface, strong corrosion resistance and high strength.
The inner cavity is resistant to acid and alkali organic solvents, and 5mm aging resistant plastic plate is used.
The console is resistant to acid and alkali and corrosive solvents, and 13mm physical and chemical board table top is used.
All water and electricity circuits are safely arranged in the machine, and convenient maintenance ports are set on the rear plate.
Equipped with brand power sockets, long service life.
The water supply outlet adopts quick opening valve to facilitate water intake.
Move the glass door up and down to open the door smoothly and conveniently.
The overhead low-noise exhaust fan has good deodorization effect.
The diameter of the top exhaust pipe is 250mm, and the length can be selected according to the customer's requirements.
SUS304 stainless steel drainage tank can dilute the disinfectant with water and then discharge it.
| Name | Fume hood | ||
| Model | CB11F | CB21F | CB31F |
| Applicable station | Single person | Double | Three people |
| Air flow direction | vertical | vertical | vertical |
| Water inlet function | Yes | ||
| Air intake function | Yes | ||
| wind speed | 0.5m/s | ||
| lighting | LED fluorescent lamp 12w*1 | ||
| illumination | ≥ 300lx (table center) | ||
| Shell | Electrostatic spraying of cold rolled steel sheet | ||
| Sliding door | Glass | ||
| Sink material | SUS304 stainless steel | ||
| Countertop material | Not less than 13mm physical and chemical plate | ||
| Lumen material | Not less than 5mm aging resistant plastic plate | ||
| Combination mode | Upper and lower split type | ||
| Top exhaust duct | 250mm diameter | ||
| Noise level | ≤60dB(A) | ||
| Internal dimensions (W * D * H) | 1000×650×1200mm | 1300×650×1200mm | 1600×650×1200mm |
| External dimensions (W * D * H) | 1200×850×2355mm | 1500×850×2355mm | 1800×850×2355mm |
| Net weight | 145Kg | 162Kg | 180Kg |
| Max. power | 280W | 300W | 450W |
| Power Supply | AC220V ±10%, 50~60Hz | ||
| Ambient temperature | 5 ～ 40℃ | ||
