Tri-gas Incubator Shaker
Product Categories: Tri-gas Incubator Shaker
This series of products is widely used in cell culture, antibody drug research and development, and the cultivation of microorganisms such as bacteria and molds. It is widely used in various pharmaceutical enterprises, environmental protection, medical and health care, and scientific research in universities.
Tel:+86-512-58666681
Can be stacked to 3 layers, saving indoor space.
Adopting a network topology based intelligent PID.
Magnetic levitation drive, direct drive system, no belt, precise speed.
Hig hquality CFC compressor. Frequency conversion compressor.
Timing to start or stop or UV timing function. More 50% energy-saving than traditional unit.
Three-level users management, complies with 21 CFR-part11. Meets GMP requirements.
The chamber is made of SUS304 stainless steel for corrosion prevention.
The chamber is waterproof, rounded design for easy cleaning.
Equiped with two lights and ultraviolet lights on two sides.
Data export by the USB port.
Call recovery function after the power failure recovery.
Continuously record data for 5 years (stored per minute).
The screen can display temperature, speed and other curve functions.
Overtemperature alarm, overspeed alarm, etc.
10 inch touch screen display, all parameters display are clear at a glance.
Anaerobic tri-gas incubator shaker
Model | Layers | Chamber | Net weight | Dimmensions(L*D*H)(mm) | Flask clamps volume | Flask volume on Sticky Stuf |
S13E | 1 unit | 400L | 275Kg | 1505×(850+65)×645 | One unit:250ml×59 or 500ml×40 or 1000ml×28 or 2000ml×18 or 3000ml× 10(only T2) or 5000ml×8(only T2)
| One unit:250ml×72 or 500ml×45 or 1000ml×28 or 2000ml×18 or 3000ml× 10(only T2) or 5000ml×8(only T2)
|
S13BE | 2 units | 400L | 550Kg | 1505×(850+65)×1245 | ||
S13CE | 3 units | 400L | 825 Kg | 1505×(850+65)×1845 | ||
S23E | 1 unit | 500L | 278 Kg | 1505×(850+65)×805 | ||
S23BE | 2 units | 500L | 556 Kg | 1505×(850+65)×1530 | ||
S23CE | 3 units | 500L | 834 Kg | 1505×(850+65)×2255 | ||
S33E | 1 unit | 300L | 250 Kg | 1355×(800+65)×680 | One unit:250ml×49 or 1000ml×20 or 2000ml×14 or
| One unit:250ml×59 or 1000ml×20 or 2000ml×14 or 500ml×31 or 3000ml×9
|
S33BE | 2 units | 300L | 500 Kg | 1355×(800+65)×1280 | ||
S33CE | 3 units | 300L | 750 Kg | 1355×(800+65)×1880 | ||
S53E | 1 unit | 200L | 192 Kg | 977×(796+59)×680 | One unit:250 ml×25 or 500ml×16 or 1000ml×9 or 2000ml×6 or 3000ml×5 or 5000ml×3(only T6)
| One unit:250ml×29 or 1000ml×11 or 500ml×16 or 2000ml×6 or 3000ml×5 or 5000ml×4(only T6)
|
S53BE | 2 units | 200L | 384 Kg | 977×(796+59)×1280 | ||
S53CE | 3 units | 200L | 576 Kg | 977×(796+59)×1880 | ||
S63E | 1 unit | 250L | 203 Kg | 977×(796+59)×800 | ||
S63BE | 2 units | 250L | 406 Kg | 977×(796+59)×1520 | ||
S63CE | 3 units | 250L | 609 Kg | 977×(796+59)×2240 |
High oxygen tri-gas incubator shaker
Model | Layers | Chamber | Net weight | Dimmensions(L*D*H)(mm) | Flask clamps volume | Flask volume on Sticky Stuf |
S14E | 1 unit | 400L | 275Kg | 1505×(850+65)×645 | One unit:250ml×59 or 500ml×40 or 1000ml×28 or 2000ml×18 or 3000ml× 10(only T2) or 5000ml×8(only T2)
| One unit:250ml×72 or 500ml×45 or 1000ml×28 or 2000ml×18 or 3000ml× 10(only T2) or 5000ml×8(only T2)
|
S14BE | 2 units | 400L | 550Kg | 1505×(850+65)×1245 | ||
S14CE | 3 units | 400L | 825 Kg | 1505×(850+65)×1845 | ||
S24E | 1 unit | 500L | 278 Kg | 1505×(850+65)×805 | ||
S24BE | 2 units | 500L | 556 Kg | 1505×(850+65)×1530 | ||
S24CE | 3 units | 500L | 834 Kg | 1505×(850+65)×2255 | ||
S34E | 1 unit | 300L | 250 Kg | 1355×(800+65)×680 | One unit:250ml×49 or 1000ml×20 or 2000ml×14 or
| One unit:250ml×59 or 1000ml×20 or 2000ml×14 or 500ml×31 or 3000ml×9
|
S34BE | 2 units | 300L | 500 Kg | 1355×(800+65)×1280 | ||
S34CE | 3 units | 300L | 750 Kg | 1355×(800+65)×1880 | ||
S54E | 1 unit | 200L | 192 Kg | 977×(796+59)×680 | One unit:250 ml×25 or 500ml×16 or 1000ml×9 or 2000ml×6 or 3000ml×5 or 5000ml×3(only T6)
| One unit:250ml×29 or 1000ml×11 or 500ml×16 or 2000ml×6 or 3000ml×5 or 5000ml×4(only T6)
|
S54BE | 2 units | 200L | 384 Kg | 977×(796+59)×1280 | ||
S54CE | 3 units | 200L | 576 Kg | 977×(796+59)×1880 | ||
S64E | 1 unit | 250L | 203 Kg | 977×(796+59)×800 | ||
S64BE | 2 units | 250L | 406 Kg | 977×(796+59)×1520 | ||
S64CE | 3 units | 250L | 609 Kg | 977×(796+59)×2240 |
Full oxygen tri-gas incubator shaker
Model | Layers | Chamber | Net weight | Dimmensions(L*D*H)(mm) | Flask clamps volume | Flask volume on Sticky Stuf |
S13E | 1 unit | 400L | 275Kg | 1505×(850+65)×645 | One unit:250ml×59 or 500ml×40 or 1000ml×28 or 2000ml×18 or 3000ml× 10(only T2) or 5000ml×8(only T2)
| One unit:250ml×72 or 500ml×45 or 1000ml×28 or 2000ml×18 or 3000ml× 10(only T2) or 5000ml×8(only T2)
|
S13BE | 2 units | 400L | 550Kg | 1505×(850+65)×1245 | ||
S13CE | 3 units | 400L | 825 Kg | 1505×(850+65)×1845 | ||
S23E | 1 unit | 500L | 278 Kg | 1505×(850+65)×805 | ||
S23BE | 2 units | 500L | 556 Kg | 1505×(850+65)×1530 | ||
S23CE | 3 units | 500L | 834 Kg | 1505×(850+65)×2255 | ||
S33E | 1 unit | 300L | 250 Kg | 1355×(800+65)×680 | One unit:250ml×49 or 1000ml×20 or 2000ml×14 or
| One unit:250ml×59 or 1000ml×20 or 2000ml×14 or 500ml×31 or 3000ml×9
|
S33BE | 2 units | 300L | 500 Kg | 1355×(800+65)×1280 | ||
S33CE | 3 units | 300L | 750 Kg | 1355×(800+65)×1880 | ||
S53E | 1 unit | 200L | 192 Kg | 977×(796+59)×680 | One unit:250 ml×25 or 500ml×16 or 1000ml×9 or 2000ml×6 or 3000ml×5 or 5000ml×3(only T6)
| One unit:250ml×29 or 1000ml×11 or 500ml×16 or 2000ml×6 or 3000ml×5 or 5000ml×4(only T6)
|
S53BE | 2 units | 200L | 384 Kg | 977×(796+59)×1280 | ||
S53CE | 3 units | 200L | 576 Kg | 977×(796+59)×1880 | ||
S63E | 1 unit | 250L | 203 Kg | 977×(796+59)×800 | ||
S63BE | 2 units | 250L | 406 Kg | 977×(796+59)×1520 | ||
S63CE | 3 units | 250L | 609 Kg | 977×(796+59)×2240 |
Name | Anaerobic tri-gas incubator shaker | High oxygen tri-gas incubator shaker | Full oxygen tri-gas incubator shaker | ||
Layers stacked | 1 unit,2 units,3 units | ||||
Speed range | 0,20~400rpm(Throw Φ26mm) 0,20~300rpm(Throw Φ50mm) | ||||
Speed setting | 1rpm | ||||
Speed fluctuation | ±0.5rpm | ||||
Max. load | 25kg | ||||
Shaking diameter | Φ50mm(Φ26mm) | ||||
Driving way | Magnetic direct driver (no belt) | ||||
Temp. range | 18 ℃ below room temp. (minimum 4℃) ~ 60℃ | ||||
Temp. setting | 0.1℃ | ||||
Temp. fluctuation | ±0.1℃ | ||||
Temp. uniformity(@ 37℃) | ≤±0.2℃ | ||||
Temp. recovery | ≤5min (@37℃) | ||||
Humidity range | 20%~95%rH(Optional)) | ||||
Humidity setting | 0.1% rH | ||||
Humidity fluctuation | ±1.5% rH(Optional)) | ||||
Humidity recovery | <10min(@95%37℃)(Optional)) | ||||
Humidity sensor | Capacitive | ||||
C02 range | 0~20% | ||||
C02 setting | 0.10% | ||||
C02 fluctuation | ±0.1%@5% | ||||
C02 recovery | ≤5min (@5%37℃) | ||||
C02 sensor | Infrared | ||||
02 range | 1~21% | 5~90% | 1~90% | ||
02 setting | 0.10% | ||||
02 fluctuation | ±0.1%(@25%37℃) | ||||
02 recovery | ≤5min (@25%37℃) | ||||
Sterilization | UV Light | ||||
Illumination | LED light | ||||
Display | 10 inch touch screen | ||||
Program segments | 20 segments | ||||
Door open | S1,S2,S3 open down(Top layer open up),S5,S6 open right | ||||
Curve display | Temp. curve, speed curve, humidity curve, CO2 curve, O2 curve(Optional) | ||||
Data storage volume | More than 5 years | ||||
Data storage interval | Adjustable(minimum 1 min.) | ||||
Data storage contents | Running time, temp., speed, status for record | ||||
Auto-defrost | Yes | ||||
Rail tray | Yes | ||||
Noise level | ≤55dB (cooling) | ||||
Workable Hight | 310mm(S1 series)/470mm(S2 series)/345mm(S3 series)/354mm(S5 series)/474mm(S6 series) | ||||
Max. power | 930w | ||||
Chamber waterproof | Yes | ||||
Chamber volume | 400L(S1 series)/500L(S2 series)/300L(S3 series)/200L(S5 series)/250L(S6 series) | ||||
Tray dimmensions | 1000×520mm(S1,S2 series)/850×470(S3 series)/475×465(S5,S6 series) | ||||
Power supply | AC220V ±10%, 50/60Hz |
Model | Name | Remarks |
S.A01 | S1 White light illumination assembly | for S1,S2 series |
S.A80 | S3 White light illumination assembly | for S3 series |
S.A61 | S5 White light illumination assembly | for S5,S6 series |
S.A02 | WIFI controller | |
S.A03 | 25mL Flask clamp | |
S.A04 | 50mL Flask clamp | |
S.A05 | 100mL Flask clamp | |
S.A06 | 150mL Flask clamp | |
S.A07 | 200mL Flask clamp | |
S.A08 | 250mL Flask clamp | |
S.A09 | 500mL Flask clamp | |
S.A10 | 1000mL Flask clamp | |
S.A11 | 2000mL Flask clamp | |
S.A12 | 3000mL Flask clamp | |
S.A13 | 5000mL Flask clamp | |
S.A14 | 500mL Infusion bottle clamp | |
S.A15 | 1000mL Infusion bottle clamp | |
S.A16 | 500ml/1000ml Separatory funnel clamp | |
S.A17 | Deep hole plate clamp | |
S.A18 | 96 hole SBS microplate/deephole plate clamp | |
S.A23 | Tube rack 40×5ml/Φ14 | 255×88×87mm,240×60mm(install ) |
S.A24 | Tube rack 40×10ml/Φ16 | 259×96×87mm,240×60mm(install ) |
S.A25 | Tube rack 40×15ml/Φ19 | 289×103×87mm,270×60mm(install ) |
S.A26 | Tube rack 40×20ml/Φ23 | 349×124×87mm,330×90mm(install ) |
S.A27 | Tube rack 40×50ml/Φ30 | 419×161×87mm,390×90mm(install ) |
S.A28 | Adjustable tube rack 40×5ml/Φ14 | 263×106×105mm |
S.A29 | Adjustable tube rack 40×10ml/Φ16 | 267×106×105mm |
S.A30 | Adjustable tube rack 40×15ml/Φ19 | 297×106×110mm |
S.A31 | Adjustable tube rack 40×20ml/Φ23 | 337×124×120mm |
S.A32 | Adjustable tube rack 40×50ml/Φ30 | 405×161×130mm |
S.A33 | S1 Petri dish layer partition | for S1,S2 series(Static partition) |
S.A62 | S3 Petri dish layer partition | for S3 series(Static partition) |
S.A63 | S5 Petri dish layer partition | for S5,S6 series(Static partition) |
S.A34 | S1 Multifunctional spring holder | for S1,S2 series |
S.A64 | S3 Multifunctional spring holder | for S3 series |
S.A65 | S5 Multifunctional spring holder | for S5,S6 series |
S.A35 | S1 Viscous tray | for S1,S2 series |
S.A66 | S3 Viscous tray | for S3 series |
S.A67 | S5 Viscous tray | for T5,T6 series |
S.A36 | Sticky stuff 280×280 | S1、S2 fit to 6.5 pieces , S3 fit to 5 pieces , S5、S6 fit to 3 pieces |
S.A37 | Light&UV light assembly | |
S.A38 | Light assembly | |
S.A39 | UV light assembly | |
S.A40 | Humidification bucket | |
S.A43 | S1 humidification add water module | for S1,S2,S3 series |
S.A68 | S5 humidification add water module | for S5,S6 series |
S.A45 | S1 rack 280 | for S1,S2 series |
S.A69 | S3 rack 280 | for S3 series |
S.A70 | S5 rack 280 | for S5,S6 series |
S.A47 | S1 block light module | for S1,S2 series |
S.A71 | S3 block light module | for S3 series |
S.A72 | S5 block light module | for S5,S6 series |
S.A48 | Embedded printer | |
S.A49 | 8-channel SMS/phone alarm | |
S.A50 | CO2、O2、N2 pressure reducer | |
S.A53 | Intake filter 0.25um | |
S.A54 | Electric door lock | |
S.A55 | S1 double layer tray 180 | for S1,S2 series |
S.A73 | S3 double layer tray 180 | for S3 series |
S.A74 | S5 double layer tray 180 | for S5,S6 series |
S.A56 | S1 cylindrical tray | for S1,S2 series |
S.A75 | S3 cylindrical tray | for S3 series |
S.A76 | S5 cylindrical tray | for S5,S6 series |
S.A59 | Dehumidification module | |
S.A60 | Humidification module | |
S.A61 | Sticky stuff 140X140 | S1 or S2 fit to 24 pieces,S3 fit to 18 pieces,S5 or S6 fit to 9 pieces |
S.A62 | S1 Connection sink | for S1,S2 series |
S.A77 | S3 Connection sink | for S3 series |
S.A78 | S5 Connection sink | for S5,S6 series |
S.A87 | computer monitoring software | Suitable for all models |
S.A88 | 3Q verification | Suitable for all models |
S.A89 | 125mL conical flask PC | Height 113 * Neck diameter 34 * Bottom diameter 66mm, 24 pieces/box |
S.A90 | 250mL conical flask PC | Height 138 * Neck diameter 34 * Bottom diameter 83mm, 12 pieces/box |
S.A91 | 500mL conical flask PC | Height 177 * Neck diameter 39 * Bottom diameter 101mm, 12 pieces/box |
S.A92 | 1000mL conical flask PC | Height 211 * Neck diameter 39 * Bottom diameter 127mm, 6 pieces/box |
S.A96 | 125mL conical flask PETG | Height 113 * Neck diameter 34 * Bottom diameter 66mm, 24 pieces/box |
S.A97 | 250mL conical flask PETG | Height 138 * Neck diameter 34 * Bottom diameter 83mm, 12 pieces/box |
S.A98 | 500mL conical flask PETG | Height 177 * Neck diameter 39 * Bottom diameter 101mm, 12 pieces/box |
S.A99 | 1000mL conical flask PETG | Height 211 * Neck diameter 39 * Bottom diameter 127mm, 6 pieces/box |
S.A94 | 2800mL conical bottle K glue | Height 243 * Neck diameter 96 * Bottom diameter 164mm, 6 pieces/box |
S.A95 | 5000mL conical bottle K glue | Height 253 * Neck diameter 96 * Bottom diameter 228mm, 4 pieces/box |
S.A110 | Large capacity deep hole plate fixture | for S1,S2 series |
S.A111 | S5 Large capacity deep hole plate fixture | for S5,S6 series |
![]() | ![]() | ![]() | ![]() |
Flask clamp | Deep hole plate clamp | Tube rack | Large capacity deep hole plate fixture |
S.A03-S.A13 | S.A176 | S.A23-S.A32 | S.A110-S.A111 |
![]() | ![]() | ![]() | ![]() |
Multifunctional spring holder | Rack 280 | Double layer tray 180 | WIFI controller |
S.A34,S.A64,S.A65 | S.A45,S.A69,S.A70 | S.A55,S.A73,S.A74 | S.A02 |